Basic Oper
ation
Restoring the Factory-programmed Settings
PSR-3000/1500 Owner’s Manual
73
Restoring the Factory-programmed
Settings
Restoring the Factory-programmed System
While holding the C6 key (right-most key on the keyboard), turn the [POWER] but-
ton ON.
This operation has the same result as and is a shortcut for the System Setup restore
operation explained in step 2 of the following section.
Restoring the Factory-programmed Settings
Independently by Item
1
Call up the operation display.
[FUNCTION]
→
[I] UTILITY
→
TAB[
®
] SYSTEM RESET
2
Select items by pressing the [1
π
π
π
π†
†
†
†
]–[3
π
π
π
π†
†
†
†
] buttons.
The operation of restoring the
factory-programmed settings
does not affect the Internet Set-
tings. To reset the Internet Set-
tings, refer to page 178.
CAUTION
This operation deletes all your
original data for the respec-
tive item (MIDI SETUP, USER
EFFECT, MUSIC FINDER, and
FILES&FOLDERS).
SYSTEM SETUP
Restores the System Setup parameters to the original factory set-
tings. Refer to the separate Data List booklet for details about
which parameters belong to the System Setup.
MIDI SETUP
Restores the MIDI settings including the MIDI templates on the
User tab display to the original factory status.
USER EFFECT
Restores the User Effect settings including the user effect types,
user master EQ types, and user vocal harmony types (PSR-3000)
created via the Mixing Console display to the original factory set-
tings.
MUSIC FINDER
Restores the Music Finder data (all records) to the original factory
settings.
FILES&FOLDERS
Deletes all files and folders stored in the User tab display.
REGIST
Temporarily deletes the current Registration Memory settings of
the selected Bank. The same can be done also by turning the
[POWER] button ON while holding the B5 key (right-most B key
on the keyboard).
3
4
2