Yamaha Portable Grand DGX-670, Справочное руководство, Страница: 70 / 93

70
DGX-670 Reference Manual
8
Mix
e
r
Editing and Saving Your Original Effect Type
1
Once you’ve selected an Effect Block and Effect Type in the previous section, use the
[8

] ( Detail ) buttons to call up the display for editing the effect parameters.
2
Use the [2

]–[4

] ( Parameter ) buttons to select a parameter, and then use the
[5

]/[6

] ( Value ) buttons to edit the value.
When Reverb , Chorus , or DSP1 is selected as the Effect Block, you can adjust the Return Level via the
[7

] ( Effect Return Level ) buttons.
3
Press one of the [8

] ( Save ) buttons to call up the User Effect display for the Save
operation.
4
Use the [2

]–[5

] ( Memory ) buttons to select the destination for saving the
settings as a User Effect.
If necessary, change the User Effect name. Press one of the [6

] ( Rename ) buttons to call up the
Character Entry window, enter the name, and then press the [8

] ( OK ) button.
5
Press the [8

] ( OK ) button to carry out the Save operation.
To return to the previous display, press the [EXIT] button.
To call up the User Effect saved here, select the
User category of the corresponding Effect Block in step 4
on page 69 .
2 3