Recording Settings
POCKETRAK CX Reference Manual
20
Customizing the recording EQ
The USER recording EQ enables you to customize the level of five EQ bands.
1.
Select “USER” while the recording EQ screen is dis-
played.
Refer to steps 1-5 in the “Selecting a recording EQ
option” section on
2.
Press the [VOL -] button.
The 150Hz band will be selected and displayed as a black
bar.
3.
Press the [
]/[
] buttons to select a frequency band that you wish to
cut or boost.
The selected frequency band will be displayed as a black bar.
4.
Press the [VOL +/-] buttons to boost or cut the level of the selected fre-
quency band.
You can boost the level by as much as +12dB or cut the level by as much as -12dB
in 1dB steps. The larger value will raise the recording level and boost the fre-
quency band.
Note:
· To adjust the level of other frequency bands, repeat steps 3 and 4.
· To cancel the operation, press the [STOP/ESC
] button.
5.
Press the [MENU/ENTER] button.
The USER recording EQ is now customized. Adjust the recording level, then press
the [REC/PAUSE
] button again to start recording (see
Note:
· The USER recording EQ setting is retained when you turn the power off or change the
battery. However, the setting will be lost if you change the battery without first turning
the power off.