manualshive.com logo in svg

Yamaha PM 5000 Series, Руководство пользователя

Пульт Yamaha PM 5000 Series - это профессиональное аудиооборудование для звукорежиссеров и музыкантов. Вы можете скачать бесплатный руководство пользователя с блок-схемой на нашем сайте. Получите полную информацию о функциях и возможностях этого устройства прямо сейчас! (Download it from manualshive.com).

Поделиться
Скачать
background image

14

PM5000 Overview

Expansion:Connecting to External Equipment

The PM5000 is entirely self-contained and can be used 
effectively on its own, but it does provide some versatile 
expansion capabilities. In this section we’ll describe how 
the PM5000 can be synchronized with external gear and 
cascaded with other Yamaha mixing consoles.

Cascade

Two types of cascade connectors are provided on the 
PM5000 rear panel: TYPE [A] for connection to a 
second PM5000, and TYPE [B] for connection to 
Yamaha PM4000/3500 series mixing consoles. In either 
case the extra console will be added to increase the total 
number of available input channels.

Type A

When the TYPE [A] connectors of two PM5000 consoles are 
connected via a cross cable the functions listed below become 
linked between the master and slave consoles. The slave console’s 
utility mode can be used to specify reception of individual 
parameters.

•  VCA master section (mute & fade, fade time link).
• Mute master.
•  The cue/solo setting (sync of all cue groups).
•  Scene memory (synchronized storage and recall of the same 

scene number).

The TYPE [A] port can also be connected to the serial RS-422 or 
RS-232C port of a personal computer for offline console parameter 
editing. PM5000 setup data can be transferred to and from the 
console in standard CSV file format and edited in any spreadsheet 
application that can import and export CSV data. The edited data 
can then be directly read back into the PM5000.

Type B

The TYPE [B] cascade connector can be used to connect the 
PM5000 to a Yamaha PM4000 or PM3500 series console for 
linkage of the functions listed below. In this case the PM5000 will 
function as the master console, there is no need to use the utility 
mode to set the receive parameters. Cue/solo settings can, 
however, be transmitted from the PM4000/3500.

• VCA master section (mute & fade, fade time link).
• Mute master (except for the PM3500).
• The cue/solo setting (sync of input cue only).

MIDI

The PM5000 MIDI connectors allow connection to other 
MIDI equipment to provide the following capabilities:

•  Program change message reception from an external MIDI 

device for scene memory selection.

•  Transmission of appropriate program change messages to 

external MIDI gear when a scene memory is recalled on the 
PM5000.

•  Control change reception from an external MIDI device for 

control of PM5000 panel control values.

•  Transmission of appropriate control change messages to 

external MIDI gear when a panel control is operated on the 
PM5000.

In order to select the PM5000’s 1000 internal scene 
memories using MIDI program change messages 1~128 
it is necessary to use program change bank select 
messages or create an program change table for the 
PM5000. The program change table will also determine 
which program change number is transmitted by the 
PM5000 when a scene memory is recalled. MIDI 
settings can be accessed via the console’s utility 
functions. Also refer to the MIDI data list at the end of 
this manual.

GPI (General Purpose Interface)

The GPI port allows pulse-signal interfacing with 
compatible external equipment for bi-directional control 
of several functions. Receive functions include 
incrementing or decrementing of the PM5000 scene 
memory and talkback on/off switching. GPI data can be 
transmitted when a fader is operated (manually or 
automatically), or when a specified scene memory is 
recalled. All of these functions are accessible via the 
PM5000 utility functions. Refer to the GPI Pin 
Assignments chart at the end of this manual for more 
information.

NOTE

See the detailed descriptions of the related utility functions in the 
Utility Functions section beginning on page 56.

THRU

OUT

IN

MIDI

GPI

RS232C

RS422

MASTER

SLAVE

A

B

NOTE

Appropriate MIDI cables must be connected from the OUT 
connector of the transmitting device to the IN connector of the 
receiving device. The THRU connector on the receiving devices 
re-transmits the data received at the IN connector. On the 
PM5000 an “echo” function can be used to retransmit data 
received at the IN connector via the OUT connector.

Содержание PM 5000 Series











































































































Отзывы:

Нет отзывов

Похожие инструкции для PM 5000 Series

Varimixer W80 Spare Part And Operation Manual preview
W80
Бренд: Varimixer Страницы: 29
Dash delish DCSM350 Instruction Manual preview
delish DCSM350
Бренд: Dash Страницы: 25
Hamilton Beach 62630 User Manual preview
62630
Бренд: Hamilton Beach Страницы: 24
Yamaha TF-Rack Quick Manual preview
TF-Rack
Бренд: Yamaha Страницы: 28
Continental Electric CP43139 Instruction Manual preview
CP43139
Бренд: Continental Electric Страницы: 8
MBW MM120 Operator'S Safety And Service Manual preview
MM120
Бренд: MBW Страницы: 33
DigiTech TURBO FLANGE Manual preview
TURBO FLANGE
Бренд: DigiTech Страницы: 12
Phonic MM1002 (Japanese) User Manual preview
MM1002
Бренд: Phonic Страницы: 19
Carlsbro MARLIN 10400 Specification preview
MARLIN 10400
Бренд: Carlsbro Страницы: 4
Sunbeam DELUXE MIXMASTER 2366 Instruction Manual preview
DELUXE MIXMASTER 2366
Бренд: Sunbeam Страницы: 56
Famag IM-5S User Manual preview
IM-5S
Бренд: Famag Страницы: 16
A SYSTEMS DMP81 User Manual preview
DMP81
Бренд: A SYSTEMS Страницы: 16
argon audio AW1701-HD User Manual preview
AW1701-HD
Бренд: argon audio Страницы: 10
Dash Everyday Instruction Manual preview
Everyday
Бренд: Dash Страницы: 17
Shure M63 AUDIO MASTER Techical Data preview
M63 AUDIO MASTER
Бренд: Shure Страницы: 6
Ozito OZCM44A Operation Manual preview
OZCM44A
Бренд: Ozito Страницы: 12
Fulltone 2B Owner'S Manual preview
2B
Бренд: Fulltone Страницы: 2
Logitech G 945-000024 User Manual preview
945-000024
Бренд: Logitech G Страницы: 89

Бренды по названию

Популярные бренды

Загрузить еще бренды