Yamaha PM 5000 Series, Руководство пользователя

Страница: 90 / 106

Appendix
88
Internal Switch Settings For Each module
As you tell from the PM5000 block diagram, each module has a number of internal switch settings. These settings can be
changed to “customize” the PM5000 signal flow to most ideally suit your mixing requirements.
The chart below lists the switches and their functions. In some cases two switches must be set appropriately to specify a
function. When changing internal switch settings make only the necessary changes while referring to the block diagram.
= initial factory settings.
Module Target
Switch No./
Setting
Switch No./
Setting
Selectable function Module Target
Switch No./
Setting
Switch No./Setting
MONO
Input DIRECT
OUT SW105 SW106
PRE n/a The direct out signal is pre-EQ (SW106 has
no effect).
POST PRE The direct out signal is post-EQ, pre-fader.
POST POST The direct out signal is post-fader, post-on
switch.
AUX PRE
FADER SW107
PRE The pre-fader aux signal is sent to the bus
pre-EQ (PRE) or post-EQ (POST).
POST
STEREO
Input AUX PRE
FADER SW106
PRE The pre-fader aux signal is sent to the bus
pre-EQ (PRE) or post-EQ (POST).
POST
Ø SW
MODE
(Phase SW
Mode) SW105
L&R Input signal phase inversion is applied to
both stereo channels (L&R) or only the left
channel (L ONLY).
L ONLY
STEREO
AUX
MASTER Odd-
channel
ST AUX
TO
MATRIX SW102 SW103 Even-
channel
ST AUX
TO
MATRIX SW105 SW106
PRE PRE The odd-numbered channel ST AUX TO
MATRIX signal is pre-fader, pre-on switch. PRE PRE The even-numbered channel ST AUX TO
MATRIX signal is pre-fader, pre-on switch.
POST PRE The odd-numbered channel ST AUX TO
MATRIX signal is post-fader, pre-on switch. POST PRE The even-numbered channel ST AUX TO
MATRIX signal is post-fader, pre-on switch.
PRE POST The odd-numbered channel ST AUX TO
MATRIX signal is pre-fader, post-on switch. PRE POST The even-numbered channel ST AUX TO
MATRIX signal is pre-fader, post-on switch.
POST POST The odd-numbered channel ST AUX TO
MATRIX signal is post-fader, post-on
switch. POST POST The even-numbered channel ST AUX TO
MATRIX signal is post-fader, post-on
switch.
G/A
MASTER Odd-
channel
G/A TO
MATRIX SW102 SW103 SW105 SW106
PRE PRE The odd-numbered channel G/A TO
MATRIX signal is pre-fader, pre-on switch. PRE PRE The even-numbered channel G/A TO
MATRIX signal is pre-fader, pre-on switch.
POST PRE The odd-numbered channel G/A TO
MATRIX signal is post-fader, pre-on switch. POST PRE The even-numbered channel G/A TO
MATRIX signal is post-fader, pre-on switch.
PRE POST The odd-numbered channel G/A TO
MATRIX signal is pre-fader, post-on switch. PRE POST The even-numbered channel G/A TO
MATRIX signal is pre-fader, post-on switch.
POST POST The odd-numbered channel G/A TO
MATRIX signal is post-fader, post-on
switch. POST POST The even-numbered channel G/A TO
MATRIX signal is post-fader, post-on
switch.
Odd-
channel
G/A TO
STEREO SW101 Even-
channel
G/A TO
STEREO
PRE The odd-numbered channel G/A TO
STEREO signal is pre-on switch (PRE) or
post-on switch (POST). PRE The even-numbered channel G/A TO
STEREO signal is pre-on switch (PRE) or
post-on switch (POST).
POST POST
ST
MONO
MASTER L TO
MATRIX SW102 SW103 R TO
MATRIX SW105 SW106
PRE PRE The left-channel TO MATRIX signal is pre-
fader, pre-on switch. PRE PRE The right-channel TO MATRIX signal is
pre-fader, pre-on switch.
POST PRE The left-channel TO MATRIX signal is
post-fader, pre-on switch. POST PRE The right-channel TO MATRIX signal is
post-fader, pre-on switch.
PRE POST The left-channel TO MATRIX signal is pre-
fader, post-on switch. PRE POST The right-channel TO MATRIX signal is
pre-fader, post-on switch.
POST POST The left-channel TO MATRIX signal is
post-fader, post-on switch. POST POST The right-channel TO MATRIX signal is
post-fader, post-on switch.