53
Parameters /
Setup Detail Parameter Window
■
Ctrl (Control) Matrix Parameter Tab ............................
Many of the PLG150-AN’s parameters can be controlled in real time. The Control Matrix
provides an extraordinarily comprehensive and flexible way to control these parameters.
Up to 15 different controllers can be used simultaneously to control 15 separate parame-
ters. The particular physical controllers used depend on the connected MIDI instrument.
Among the more commonly used controllers are: velocity, modulation wheel, after touch,
and foot controller. Since any of the MIDI Control Change numbers can be used for con-
trol sources, you can set up highly complex routings and automated sound changes by
recording these Control Change messages to a host application.
The Control Matrix settings determine which “source” (i.e., MIDI Control Change num-
bers, Modulation Wheel, Foot Controller, etc.) is used to control which PLG150-AN “des-
tination” parameter (i.e., VCF Cutoff, Resonance, FEG Depth, etc.).
This gives you the freedom to configure a completely different set of sources and desti-
nation parameters for each voice. You can, for example, configure the AN1x to use After
Touch to apply vibrato, or the Modulation Wheel to change the resonance while you play,
determine the range for both Pitch Bend up and down, and much more.
The Control Matrix provides 15 sets of control setup parameters. The Depth of the con-
troller effect can also be set independently for each of the 15 sets.
