9
Using the Harmony Effect
To do this:
1)
Select the Utility mode. (Press the [UTIL] button.)
2)
Select the “PLUGIN” menu. (Use the [SELECT
/
] buttons, and press the
[ENTER] button.)
3)
Select the “PLG100-VH” (Harmony) menu. (Use the [SELECT
] button, and
press the [ENTER] button.)
C
Set the Harmony Channel (Utility mode).
This determines the MIDI receive channel for the Harmony effect, and should be set to
the same value as set for the MIDI device in step #1 above. Harmony Channel is set in
the Utility mode. (For more information on the Utility mode and its parameters, see
page 24.)
4)
Set the Harmony Channel value to 1.
Use the [SELECT
] button if necessary to select “Harmony Ch” (Harmony
Channel), then use the [VALUE
/
] buttons to set the value to “01” (or the
same value as the transmit channel of the connected MIDI device).
V
Assign the Harmony effect to the desired Part (in the Harmony Edit menu).
To do this:
1)
Select the Effect menus. (Press the [EFFECT] button.)
