Talking with Multiple Locations
12
This system enables simultaneous talk between up to four locations (with the mesh connection) through an IP network. It
is also possible to call additional locations as required during a call. To hold a communication between multiple
locations, begin a call with a single location and then call other required locations.
y
• Communication between up to eight locations is also possible
by using the cascade connection. For details, refer to
“Hierarchical Connection of Multiple ProjectPhone (Cascade
Connection)” (page 26) in the “Setup guide” (a separate
manual).
• After connecting the locations with mesh connection through
the IP network, each location can call an additional location
through the telephone circuit.
■
To call another location during a call
Refer to one of the following procedure during a
call.
– Calling another unit by specifying an IP address
– Calling another unit by specifying a telephone
– Calling another unit using the address book (page 8)
– Calling another unit using the call history (page 9)
The new location is added to the ongoing conference.
■
To answer a call during a call
Refer to the procedure in “Answering a Call”
(page 9).
The new location is added to the ongoing conference.
Talking with Multiple Locations
1
2
3
4
5
6
7
8
9
0
MIC MUTE
VOL
1
2
3
4
5
6
7
8
9
0
MIC MUTE
VOL
1
2
3
4
5
6
7
8
9
0
MIC MUTE
VOL
1
2
3
4
5
6
7
8
9
0
MIC MUTE
VOL
1
2
3
4
5
6
7
8
9
0
MIC MUTE
VOL
1
2
3
4
5
6
7
8
9
0
MIC MUTE
VOL
Connecting more than two locations
Call another location during a call
Connecting
Connecting
Connecting
Headquarter
Branch A
Branch B
Making a call
Headquarter
Branch A
Branch B
