Yamaha PHASER MF Скачать руководство пользователя страница 95 | Manualshive

Страница: 95 / 97

Yamaha PHASER MF Скачать руководство пользователя страница 95

LINEAR MOTOR ROBOTS PHASER series

User's Manual

MF Type

All rights reserved. No part of this publication may be reproduced in any
form without the permission of YAMAHA MOTOR CO., LTD.
The contents of this manual are subject to change without prior notice.
Information furnished by YAMAHA in this manual is believed to be
reliable. However, no responsibility is assumed for possible inaccuracies
or omissions. If you find any part unclear in this manual, please contact
your distributor.

YAMAHA MOTOR CO., LTD. IM Operations

Oct. 2021
Ver. 5.40

Revision record

Manual version Issue date

Description

Ver. 2.05

Oct. 2009

Addition and correction of explanations in "Chapter 1 Using the
Robot Safely". Addition and correction of "Chapter 5 Periodic
inspection and maintenance". Clerical error corrections, etc.

Ver. 3.00

Dec. 2008 Addition of descriptions regarding the addition of MF75.

Addition and correction of "Chapter 5 Periodic inspection and
maintenance". Clerical error corrections.

Ver. 4.00

Aug. 2010 Addition of descriptions regarding the addition of MF7. Clerical

error corrections.

Ver. 5.00

Jul. 2012

Wall mount model was added to MF15. The description regarding
"Warranty" was changed. Clerical errors were corrected, etc.

Ver. 5.10

Feb. 2015 External view of MF7 wall mount model was changed.

The description regarding "Chapter 1 Safety instructions" were
changed, etc.

Ver. 5.11

Feb. 2017

IM Operations' contact information was changed.

Ver. 5.20

July 2017

The descriptions regarding "Chapter 1 Safety Instructions" were
changed.
Recommended grease for clean types was added to "Chapter 5
Periodic inspection and maintenance".

Ver. 5.31

Jul. 2018

Contents of "Safety Instructions", "Warranty" were changed.
Chapter construction was changed. Descriptions of shutter
roller replacement procedure (MF7) and part numbers of shutter
roller (MF7) were changed in "Chapter 4 Periodic inspection and
maintenance". were changed.

Ver. 5.40

Oct. 2021

“Safety Instructions” was separated. Specification chapter revision.

«
...
93
94
95
96
97
»

Содержание PHASER MF


































































































Отзывы:

Нет отзывов