P-90
Connecting a Personal Computer
ENGLISH
47
P-90 [HOST SELECT] switch setting
Set the P-90
[HOST SELECT]
switch properly according to the type of connected computer.
•
Macintosh:
“Mac” (data transfer rate: 31,250bps, 1MHz clock)
•
Windows:
“PC-2” (data transfer rate: 38,400bps)
2. Using a MIDI interface and the P-90’s MIDI connectors
Connection
Use a MIDI interface device to connect a computer to the P-90 using special MIDI cables.
P-90 [HOST SELECT] switch setting
Set the P-90
[HOST SELECT]
switch to “MIDI.”
If your system does not work properly with the connections and settings listed above, your software may require differ-
ent settings. Check your software operation manual and set the [HOST SELECT] switch to the proper data transfer rate.
(Data transfer rate of “PC-1” is 31,250bps.)
MIDI OUT
MIDI
OUT
MIDI
IN
MIDI IN
MIDI
OUT
MIDI
IN
Windows
Macintosh
P-90
MIDI interface
MIDI interface
IN
MIDI
OUT
HOST SELECT
MIDI
Mac
PC-2
PC-1