Setting Up
P-255 Owner’s Man
u
al
11
To adjust the volume, use the [MASTER VOLUME]
slider at the left of the control panel while playing the
keyboard to check the setting.
To set up the music rest, insert it into the groove at the
back of the control panel.
Your digital piano features two [PHONES] jacks,
allowing two sets of headphones to be connected at
the same time. If you wish to connect only one set,
either of the jacks can be used. No sound will be out-
put from the instrument’s speakers when headphones
are connected to either or both of the jacks.
When plugged into the [SUSTAIN PEDAL] jack, the
FC4 Foot Switch that came with your digital piano
functions in the same way as the damper pedal of an
acoustic piano—that is, it allows notes played while it
is operated to sustain for longer than normal after you
release the corresponding keys. You can also connect
either an FC3 Foot Pedal or an FC5 Foot Switch (sold
separately). The FC3 supports half-damper playing.
Half-damper playing
Your digital piano can adjust the length of sustain in
response to how much the pedal is operated. In spe-
cific terms, the more the pedal is operated, the longer
the notes sustain. If, for example, too much sustain is
applied when you operate the pedal, reduce the level
(and make the sound clearer) by allowing the pedal to
return slightly.
Adjusting the volume
Setting up the music rest
Using headphones
• To prevent hearing loss, avoid using headphones at high
volumes for extended periods of time.
Lo
u
der
Q
u
ieter
Front panel
Standard stereo-
phone pl
u
g
CAUTION
Connecting pedals (Sustain pedal)
• Do not turn on the instrument with a foot switch or pedal operated. Failure to
observe this precaution can cause the on and off positions of the switch or pedal
to be reversed.
• Be sure to turn off the digital piano before connecting or disconnecting a foot
switch or pedal.
FC4
NOTE
Содержание P-255
Страница 58: ...P 255 Owner s Manual 58 ...
