Yamaha P-250, Руководство по установке

Страница: 6 / 22

6 TOOLS for P-250 Installation Guide
English
Minimum System Requirements
n
Depending on your operating system, it may be necessary to satisfy con-
ditions in addition to those listed below.
• File Utility (including MIDI setup)
• USB MIDI Driver
• YAMAHA CBX Driver
Software Installation
n
For details about the application software which has no installation guide
described below, refer to the online manual of each software.
Acrobat Reader
In order to view the PDF manuals included with each application, you’ll
need to install Acrobat Reader.
n
If an older version of Acrobat Reader is installed on your PC, you’ll need
to uninstall it before proceeding.
1
Double-click on the “Acroread_” folder.
Five different language folders will be displayed.
2
Select the language you want to use and double-click on its folder.
“ar******.exe” file will be displayed. (“***” indicates the Acrobat
Reader version and the selected language.)
n
The file name might change if the application software has been upgrad-
ed.
3
Double-click on the “ar******.exe.”
Acrobat Reader Setup Dialog box will be displayed.
4
Execute the installation by following the on-screen directions.
After installation is complete, the Acrobat folder appears on your
PC (in Program Files, as the default).
For information on using the Acrobat Reader, refer to the Reader
Guide in the Help menu.
USB MIDI Driver
To operate the P-250 from your computer via USB, you’ll need to install
the appropriate driver software.
The USB-MIDI driver is software that transfers MIDI data back and
forth between sequence software and the P-250 via a USB cable.
→
Windows 98/Me users See below.
→
Windows 2000 users See page 7.
→
Windows XP users See page 8.
n
Before you install the USB MIDI driver, you can minimize the pos-
sibility of problems by putting your computer in the following state.
• Close all applications and windows that you are not using.
• Disconnect all cables from the P-250 except for the cable
whose driver you are installing.
●
Installing the driver on a Windows 98/Me system
1
Start the computer.
2
Insert the included CD-ROM into the CD-ROM drive.
3
Make sure the POWER switch on the P-250 is set to OFF and use
the USB cable to connect the USB terminal of the computer (or the
USB hub) to the USB terminal of the P-250. When the P-250 is
turned on, the computer automatically displays the “Add New Hard-
ware Wizard.” If the Add New Hardware Wizard does not appear,
click “Add New Hardware” in the Control Panel.
n
For Windows Me users, check the radio button to the left of “Auto-
matic search for a better driver (Recommended)” and click [Next].
The system automatically starts searching and installing the driver.
Proceed to Step 8. If the system does not detect the driver, select
“Specify the location of the driver (Advanced)” and specify the CD-
ROM drive’s root directory (e.g., D:\) to install the driver.
Windows 98
Windows Me
Computer: PC with 160 megahertz (MHz); Intel® Pentium®/
Celeron® family
OS: Windows® 98/98SE/Me/2000/XP Home Edition/XP
Professional
Available Memory: 32 MB or more
Hard Disk: 6 MB or more
Display: 640
×
480, High Color (16 bit)
Computer: PC (with USB port) with 166 megahertz (MHz);
Intel® Pentium®/Celeron® family
OS: Windows® 98/98SE/Me/2000/XP Home Edition/XP
Professional
Available Memory: 32 MB or more
Hard Disk: 2 MB or more
OS: Windows® 95/98/98SE/Me/NT4.0/2000/XP Home
Edition/XP Professional
Uninstalling the application software
Follow the procedure below to remove the installed software.
Select [Start]
→
[Settings]
→
[Control Panel]
→
[Add/Remove
Programs]
→
[Install/Uninstall] to specify the item you wish to
remove, then click [Add/Remove...]. A dialog panel appears. Fol-
low the instructions on screen to uninstall the application soft-
ware.
n
The menu or button names may vary depending on the OS.
Computer
USB cable
Driver
Sequence
Software
P-250
MODULATION PITCH
P-200X ELECTRONIC PIANO
HIGH HI-MID
MASTER EQUALIZER VOICE/PERFORMANCE TEMPO SONG SONG BALANCE
MASTER VOLUME
POWER
LOW MIDI SETTING CHORUS REVERB SPLIT CONTRAST
XG
8
16
B
YES NO
D
A
C
BASS
15
7
PERFORM. FILE EDIT
MASTER EQ
VARIATION
PERFORMANCE VOICE
EDIT VIBRA-
PHONE
GUITAR
14
6
SYNTH. PAD
13
5
E.PIANO 3 HARPSI-
CHORD CLAVI.
ORGAN 1
EXIT
9 B A
1
GRAND
PIANO 1 EXTRA SONG
FILE PANEL
LOCK TRACKS TRACK
TOP SONG SELECT
KEYBOARD SONG
MIN
ON OFF
MAX
REC START/STOP
SYNCHRO START NEW SONG
1 TRACK 2 MIDI OUT
ORGAN 2
10
2
GRAND
PIANO 2
STRINGS
11
3
E.PIANO 1
CHOIR
12
4
E.PIANO 2
OTHER SETTING
LO-MID MID
DOWN SONG SETTING UP
USB
HOST SELECT MIDI ASSIGNABLE FOOT PEDAL
AC INLET MIDI THRU OUT IN AUX
4
SOSUTENUTO
2
SUSTAIN
1
SOFT
3
PC-2 TO HOST USB Mac
OUTPUT
R L/MONO
INPUT
R L/MONO