Yamaha O2R Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 414

Yamaha O2R Скачать руководство пользователя страница 86

Mixing and Automix

77

02R Getting Started Guide

6.

While monitoring the recording, adjust the parameters you want
to overwrite.

7.

When you have completed the automix overwriting session, use
the CURSOR buttons to select the “STOP” icon and press the
[ENTER] button.

You may find it faster and more convenient to stop the automix recording
session by stopping the device that is providing the timecode. The effect is
the same as if you selected the STOP function on the 02R.

The “REC” icon will change to normal and the “STOP” icon is highlighted.
The events recorded during the overwriting session will be added to the
current automix memory.

8.

Stop the device that is providing the timecode.

Punch-in Automix Data

If you made a mistake in just one portion of the automix, you can replace
the erroneous data with a punch-in.

1.

Use the [AUTOMIX] button to locate the AUTOMIX 1/7 page.

2.

Use the CURSOR buttons to select the desired “Overwrite” items
and press the [ENTER] button.

3.

Select the “REC” icon with the CURSOR buttons and press the
[ENTER] button.

The “REC” icon will flash.

4.

Start the device that is providing the timecode.

It should have been rewound and again start from a location before the
music starts. The previously recorded automix will playback, however,
because you have not selected any channels, the 02R will remain in
AUTOMIX RECORD READY status.

AUTOMIX

«
...
84
85
86
87
88
...
»

Содержание O2R































































































































































































































































































































































































































Отзывы:

Нет отзывов