manualshive.com logo in svg

Yamaha O2R, Руководство пользователя, Страница: 373 / 414

Поделиться
Скачать
Yamaha O2R Скачать руководство пользователя страница 373

Appendix: MIDI

263

02R User’s Guide

If parameter change reception is ON and a parameter request is received on the specified MIDI channel, the 
contents of the corresponding parameter will be transmitted on the specified MIDI channel regardless of 
whether transmission is ON or OFF.

If parameter change reception is ON and a parameter change is received on the specified MIDI channel, the 
contents of the corresponding parameter will be modified.

Transmission of KEY REMOTE parameter changes can be turned ON or OFF using the “Preferences” display 
function (see “Preferences” on page 198 of the User’s Guide) independently of other parameters. This is used 
only in special circumstances such as when externally monitoring key operations. Normally, it should be left 
OFF.

2-3. Active sensing, MIDI reset

If, after receiving Active Sensing, no messages are received for an interval longer than 300 ms, or when MIDI 
Reset is received, only the running status will be cleared.

Active Sensing is transmitted.

2-4. Quarter-frame messages

MIDI Time Code Quarter-frame messages are received at the MTC connector.

3. Echo Back

If ECHO is turned ON, the Program Change messages will be transmitted immediately after being received.

4. Transmission Condition

ACTIVE SENSE  $FEH    

PROGRAM CHANGE  $CnH

SYSTEM EXCLUSIVE
PARAMETER CHANGE 
   $F0H, $43H, $1nH

(KEY REMOTE)

 (RESPONSE FOR
PARAMETER REQUEST)

SYSTEM EXCLUSIVE
BULK DUMP    $F0H, $43H, $0nH

BULK REQUEST  $F0H, $43H, $2nH

MIDI IN  PROGRAM CHANGE  $CnH     

PGM T 

× 

ON

PARAM T 

× 

ON

KEY REMOTE T 

× 

ON

MIDI CH?

MIDI OUT

PGM ECHO ON

Содержание O2R































































































































































































































































































































































































































Отзывы:

Нет отзывов