Yamaha O2R Скачать руководство пользователя страница 334 | Manualshive

Страница: 334 / 414

Yamaha O2R Скачать руководство пользователя страница 334

224

Installing Options

02R User’s Guide

Analog I/O Card—AD/DA (CD8-AD)

The CD8-AD is used to connect an analog multitrack recorder or other
analog devices to the 02R.

Installing the CD8-AD

The CD8-AD is a double slot card. For installation instructions, see “Double
Slot Cards” on page 222 of the User’s Guide. Before you install the CD8-AD,
you need to set the individual input and output level switches. Set the
switches to –10 dBv or +4 dB as appropriate. Refer to the instructions
included with the CD8-AD for more information.

Setup of the CD8-AD

1.

Use the [DIGITAL I/O] button to locate the DIGITAL I/O 1/5 page.

If the card was installed properly, the 02R will identify it in the
appropriate slot.

2.

Make the required connections between the 02R and your
analog devices.

You should use the highest quality connecting cables you can afford to
maintain the best possible signal quality.

Analog I/O Card—A/D (CD8-AD-S)

The CD8-AD-S card offers eight analog phone jack inputs.

Installing the CD8-AD-S

The CD8-AD-S is a single slot card. For installation instructions, see “Single
Slot Cards” on page 221 of the User’s Guide. Before you install the
CD8-AD-S, you need to set the input and output level switches. Set the
switches to –10 dBv or +4 dB as appropriate. Refer to the instructions
included with the CD8-AD-S for more information.

Setup of the CD8-AD-S

1.

Use the [DIGITAL I/O] button to locate the DIGITAL I/O 1/5 page.

If the card was installed properly, the 02R will identify it in the
appropriate slot.

2.

Make the required connections between the 02R and your
analog devices.

You should use the highest quality connecting cables you can afford to
maintain the best possible signal quality.

«
...
332
333
334
335
336
...
»

Содержание O2R































































































































































































































































































































































































































Отзывы:

Нет отзывов