24
En
PLAYBACK
You can play back music files stored on a
Bluetooth
device (such as mobile device) on the unit.
• When you playing the
Bluetooth
device, set the WIRELESS switch on the rear panel to “AUTO” (p.7).
Registering a
Bluetooth
device with the unit (pairing)
1
Press (
Bluetooth
) on the remote control.
If no
Bluetooth
device has been registered yet, the status
indicator on the front panel flashes in blue.
2
Turn on the
Bluetooth
function on the
Bluetooth
device.
The operation varies depending on the device. Refer to
the instruction manual supplied with the device.
3
Select “NX-N500 XXXXXX Bluetooth” in the
Bluetooth
device list on the device.
Where “xxxxxx” represents the unique alphanumerics.
• If this unit has been registered with the MusicCast CONTROLLER,
the room name entered during registration appears.
If or a connection completed message appears on the
paired device, pairing is finished.
When pairing is finished, the status indicator changes to
lit.
4
Playback a song on the
Bluetooth
device.
• Perform pairing with the
Bluetooth
device and unit within 10 m (33 ft) of
each other.
• This unit can be paired with a maximum total of 20
Bluetooth
devices for
reception and transmission. When the 21st device is registered, the least
frequently used pairing information is deleted.
• If a
Bluetooth
device has been connected before, the unit will connect to
the last connected device when
(
Bluetooh
) is pressed with step 1.
Disconnect this connection to pair a new device (p.25).
• Refer to “Bluetooth” (p. 34) in “Troubleshooting” if paring is not possible.
Playing back music via
Bluetooth
(
Bluetooth
)
Blue (flashing)
NX-N500 XXXXXX Bluetooth
Blue (lit)
