NUAGE V1.1 Supplementary Manual
9
Added some editing
operations (Nuage Master)
The waveform offset can be changed, and the cut/copied
event(s) can be pasted maintaining the position relative to
the Project Cursor.
EDIT Section
1
[MOVE]
When the Object Selection Tool is selected, if you turn the
[JOG WHEEL] while holding down [SHIFT] and [ALT], the
waveform offset of the selected track can be changed.
2
[PASTE]
When the Object Selection Tool is selected, if you press
[PASTE] while holding down [SHIFT], the cut/copied
event(s) can be pasted maintaining the position relative to
the Project Cursor.
Added other various functions
(Nuage Master)
SETUP Page
1
Disp Mode
Selects the display format of a [Channel name display].
2
Numeric Pad Input
Selects the input format when you set the Project Cursor
position in the Locate function. If you set this to “Right,”
you can input the Project Cursor position as a text.
DYN Page
1
Title Bar
Turns the “Bypass” switch that you touch on (lit) and off.
2
Parameters
Displays each processor's parameters. The parameters
that you touched can be controlled with the [Multi function
knob].
If you press the rightmost [Multi function knob] when
“Comp” is selected, the related parameters are displayed
in graph form. To return to the previous view, press the
[Multi function knob] again.
TRANSPORT Page
MAIN Page
1
Lock/Unlock
Lock (lit) or unlock “CLICK” and “TEMPO.”
If you lock these parameters, they cannot be controlled.
1
2
1
2
2
1
1
