Description of the Software Programs
NUAGE MASTER Operation Manual
33
When you touch “Channel information,” the channel
selection window is shown.
To scroll through the window, touch “
u
” or “
d
.” When you
touch the channel, the channel is selected and the
window closes.
When you touch “
” in the Title area, the window
indicating the output level of the selected channel is
shown.
In this condition, you can adjust the output level by the
rightmost [Multi function knob]. To close the window,
touch “
.”
By touching “Nuendo” in the Tool area, you can open the
channels configuration window on the screen. However, in
the PLUG-IN page, the plug-in effect window is opened.
Touch again to close.
Controls and Functions
MAIN Page
This page is for operating Routing, Phase, Low Cut, etc.
for the selected channel.
1
Input Routing
Calls up the Input Routing pull-down menu, letting you
select the port.
2
HC
Adjusts the frequency of High Cut.
3
LC
Adjusts the frequency of Low Cut.
4
Gain
Adjusts Input Gain.
5
Phase
Turns phase inversion on (lit) and off.
6
Summing Mode
Turns Summing Mode on (lit) and off. When this is on, you
can output the audio signal of multiple ports at the same
time.
7
On/Off
Turns Direct Routing on (lit) and off.
8
Direct Routing
Selects the port for Direct Routing.
9
M
Turns Mute on (lit) and off.
7
8
@
#
1
2
3
!
4
5
9
6
)
[PARAM]
[PARAM]
[PARAM]
