Yamaha NS-WSW120 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 83

background image

PREPARATIONS

➤

Initial settings

En

37

Operating the unit by TV’s remote control (HDMI control)

HDMI Control allows you to operate external devices via HDMI. If you connect a TV that
supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as
power and volume) with TV remote control operations. You can also control playback
devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with
an HDMI cable.

Coordinated functions via the TV remote control

First, try the operations described above with your TV’s remote control. If you are able
to perform these operations, you may continue operating this unit with your TV’s remote
control. The HDMI control function can be used with some HDMI devices by simply
activating the function. If you are not able to perform these operations, configure HDMI
control settings (p. 38).

With some TVs, the following additional functions can be controlled.

• Turning the UniVolume function on and off

• Navigating this unit’s menus displayed on the TV

• Even if your TV supports the HDMI control function, some functions may not be available. For details, refer

to the manual supplied with your TV.

• We suggest using devices (TV, BD/DVD player, etc.) from the same manufacturer.

What is the HDMI control function?

Remote control of TV (Example)

1. Turn on/off

Both the TV and this unit turn on/off at the same time.

3. Control volume

This unit’s volume can be adjusted when “HDMI AUDIO
OUT” (p. 59) is set to “AMP” (default).

4. Switch the audio output device (TV or this unit)

2. Switch input sources

• The input source for this unit switches accordingly when the TV’s

input source is switched. The input source for this unit also switches
when a BD/DVD player is selected as the input source from the TV’s
menu display.

• The input source can be switched while this unit is turned off.

«
...
35
36
37
38
39
...
»

Содержание NS-WSW120




















































































Отзывы:

Нет отзывов

Похожие инструкции для NS-WSW120

security system

Бренд: Safe-at-home Страницы: 5

Бренд: iDance Страницы: 25

Бренд: Qudo Страницы: 6

Бренд: QFX Страницы: 6

Бренд: Magmaweld Страницы: 172

THUNDER PRO TP1100

Бренд: MTX Страницы: 6

Blueprint H615W

Бренд: MTX Страницы: 8

Sound Terrain SS-84G

Бренд: OEM Страницы: 1

Бренд: JBL Страницы: 52

Бренд: Umirs Europe Страницы: 24

Caddy Tig 1500i VRD

Бренд: ESAB Страницы: 28

eurolive b512dsp

Бренд: Behringer Страницы: 5

Бренд: Prology Страницы: 27

Бренд: Castle Care-Tech Страницы: 56

SpeedFace Series

Бренд: ZKTeco Страницы: 11

Бренд: DAB Страницы: 228

Бренд: Medion Страницы: 122

Бренд: QMotion Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды