35
En
Playback features
PR
EPAR
ATIO
N
C
ONNE
CTIO
N/
INIT
IAL S
ETT
INGS
PLA
YBA
CK
S
ETTIN
GS
TRO
UBLE
S
HO
O
T
IN
G
APP
END
IX
Play back music stored in the Bluetooth components (portable audio
players, Bluetooth-enabled computers, etc.) connected to the
Bluetooth Wireless Audio Receiver (optional YBA-10).
Playing back Bluetooth components
Pairing
1
As described in step 1 (
back iPod/iPhone”, connect the Bluetooth
Wireless Audio Receiver (optional YBA-10)
to DOCK terminal.
4)
2
Press
DOCK key to set the input to
DOCK.
3
Turn on the Bluetooth component you
want to pair with, and then enter pairing
state.
5)
4
Press
OPTION
key.
Option menu for DOCK input appears in the display.
5
Select “Pairing” by pressing
U
/
V
key and press
ENTER key.
6)
“Searching...” appears on the display when the Bluetooth
connection is initiated.
About “Pairing”
It is the operation of registering a component for
communications. Pairing must be performed before using a
Bluetooth component with the Yamaha Bluetooth Wireless
Audio Receiver connected to the system for the first time, or if
the registered pairing data has been deleted.
To ensure security, a time limit of 8 minutes is set for the pairing
operation. Please read and fully understand all the instructions
before starting.
6
Check that the Bluetooth components
recognize the Bluetooth Wireless Audio
Receiver.
If the Bluetooth component detects the Yamaha Bluetooth
wireless audio receiver, the audio receiver name (“YBA-10
YAMAHA”, for example) appears in the device list of the
Bluetooth component.
7
Select the Bluetooth Wireless Audio
Receiver from the component list of the
Bluetooth components and input “0000”
for password of the Bluetooth.
Connecting
1
Press
DOCK key to set the input to
DOCK.
2
Press
OPTION
key.
3
Select “Connect” and press
ENTER
key.
8)
4
To disconnect the Bluetooth Wireless
Audio Receiver from the Bluetooth
component, press
OPTION key again to
display option menu, select “Disconnect”,
and press
ENTER key.
7)
For details, refer to the manual supplied with YBA-10.
Refer to the manual of your Bluetooth component for details.
To cancel pairing, press
RETURN key.
When establishing the Bluetooth connection from this unit, it is only
possible to connect to the most recently connected Bluetooth component.
• For details of messages, refer to “Bluetooth (
• If you want to establish a connection with a Bluetooth other than the
one most recently connected, initiate the connection from that
Bluetooth component. Refer to the manual of your Bluetooth
component for details.
4)
y
5)
y
6)
y
7)
y
8)
y
