Yamaha NS-BR301 Скачать руководство пользователя страница 31

Страница: 31 / 40

Troubleshooting

ADDITIONAL

INFOR

ATION

Engli

■

Messages for iPod/iPhone and USB device

Confirm the connection of your device if any malfunctions except the following message in the front panel display occurred. (

☞

P. 16)

Problem

Cause

Solution

See

page

FM stereo reception is
noisy.

The characteristics of FM stereo
broadcasts may cause this problem when
the transmitter is too far away, or if the
antenna quality is poor.

Check the antenna connections.

Try using a high-quality directional FM
antenna.

—

Set the reception mode to “MONO”.

There is distortion, and
clear reception cannot
be obtained, even with
a good FM antenna.

There is multi-path interference.

Adjust the antenna position to eliminate multi-
path interference.

—

The desired station
cannot be tuned into
with the automatic
tuning method.

The signal is too weak.

Use a high-quality directional FM antenna.

—

Set the reception mode to “MONO” and press

TUNING

to change frequency by 1

step.

13, 14

Note

Status message

Cause

Solution

See

page

Unknown iPod

The iPod/iPhone or USB device being
used is not supported by this unit.

Connect a supported iPod/iPhone or USB device
to this unit.

No Device

An iPod/iPhone or USB device is not
connected to this unit.

Connect an iPod/iPhone or USB device in which
playback enabled music files are saved.

—

The iPod/iPhone or USB device is in data
processing.

The message disappears when data processing
finishes.

—

No Content

There is no music file to enable playback.

Connect an iPod/iPhone or USB device in which
playback enabled music files are saved.

—

The music file cannot be read.

See whether the music file can be played back by
another device such as a PC.

—

Unable to Play

The format of the selected music file is
not supported.

Save the music file in a supported format.

—

The selected music file is broken.

Select another music file.

—

Connect Error

The iPod/iPhone or USB device has a
problem with communication.

Set this unit to the standby mode and reconnect
the iPod/iPhone or USB device again.

—

Root

Stops and returns to the root directory.

The message disappears when playback starts.

—

Disconnected

An iPod/iPhone or USB device has been
removed from the USB port of this unit.

The message disappears after 3 seconds.

Содержание NS-BR301









































Результаты поиска

Содержание NS-BR301

Отзывы:

Похожие инструкции для NS-BR301

Бренды по названию

Популярные бренды

Yamaha NS-BR301, Руководство пользователя

Результаты поиска

Содержание NS-BR301

Отзывы:

Похожие инструкции для NS-BR301

Бренды по названию

Популярные бренды