Yamaha NP-30, Руководство пользователя

Страница: 21 / 40

Selecting & Playing Voices
NP-30/YNP-25 Owner’s Manual
21
Transposition
The Transpose function makes it possible to shift the pitch of the entire keyboard up or down in
semitone intervals to facilitate playing in difficult key signatures, and to let you easily match the
pitch of the keyboard to the range of a singer or other instruments. For example, if you set the
transposition amount to “+5,” playing key C produces pitch F. In this way, you can play a song as
though it were in C major, and the NP-30/YNP-25 will transpose it to the key of F.
Setting the amount of transposition
While holding down the [SONG
W W
W W
/
A A
A A
] and [GRAND PIANO] buttons, press one
of the F
#
2–F
#
3 keys to set the desired amount of transposition.
To transpose the pitch down (in semitone steps)
While holding down the
[SONG
W W W W
/
A A A A
]
and
[GRAND PIANO]
buttons, press any
key between F
#
2 and B2.
To transpose the pitch up (in semitone steps)
While holding down the [SONG
W W
W W
/
A A
A A
] and [GRAND PIANO] buttons, press any
key between C
#
3 and F
#
3.
To restore the normal pitch
While holding down the
[SONG
W W W W
/
A A A A
]
and
[GRAND PIANO]
buttons, press the
C3 key.
Fine tuning of the Pitch
You can fine tune the pitch of the entire instrument. This function is useful when you play the NP-
30/YNP-25 along with other instruments or CD music.
Setting the Pitch
To raise the pitch
in about 1cent steps (100 cents
= 1 semitone):
Hold down the E0, F0 and G0
keys simultaneously and press any
key between C3 and B3.
To lower the pitch
in about 1cent steps (100 cents
= 1 semitone):
Hold down the E0, F0 and F
#
0
keys simultaneously and press any
key between C3 and B3.
To restore standard pitch:
Hold down the E0, F0, F
#
0 and
G0 keys simultaneously and press
any key between C3 and B3.
TERMINOLOGY
Transpose:
Changing the key signature. On
the NP-30/YNP-25, transposing
shifts the pitch of the entire key-
board.
Transposition range:
F # 2 (-6 semitones)–
C3 (normal pitch)–
F # 3 (+6 semitones)
NOTE
C1 C2
0 -1
-2 +1 +3 -4
-3 -5 +2 +4 +5
-6 +6
F # 3 F # 2
Setting range: -65–+65 cents
The default setting (0 cent) is
A3=440Hz. In the 440Hz region,
1Hz=approximately 4 cents.
Pressing the key 8 times for
example, will set A3 at approxi-
mately 442Hz.
TERMINOLOGY
Default setting:
The “Default setting” refers to the
factory setting obtained when you
first turn on the power to the NP-
30/YNP-25.
NOTE
C1 C2 C3 B3 G0 E0
F0
C1 E0
F0
C2 C3 B3
F # 0
C1 G0 E0
F0
C2 C3 B3
F # 0