background image

Perio

d

ic maintenance an

d

 a

d

justment

6-36

6

En

g

ine overheatin

g

WARNING

EWAT1041

Do not remove the ra

d

iator cap when the en

g

ine an

d

 ra

d

iator are hot. Scal

d

in

g

 hot flui

d

 an

d

 steam may 

b

e

b

lown out un

d

er pressure, which coul

d

 cause serious injury. Be sure to wait until the en

g

ine has coole

d

.

Place a thick ra

g

, like a towel, over the ra

d

iator cap, an

d

 then slowly rotate the cap counterclockwise to the

d

etent to allow any resi

d

ual pressure to escape. When the hissin

g

 soun

d

 has stoppe

d

, press 

d

own on the cap

while turnin

g

 it counterclockwise, an

d

 then remove the cap.

TIP

If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended cool-
ant as soon as possible.

Wait until the 
engine has cooled.

Check the coolant level in the 
reservoir and radiator.

The coolant level 
is OK.

The coolant level is low.
Check the cooling system
for leakage.

Have a Yamaha dealer check
and repair the cooling system.

Add coolant. (See TIP.)

Start the engine. If the engine overheats again, 

have a 

Yamaha dealer check and repair the cooling system.

There is
leakage.

There is 
no leakage.

UBD5E0E0.book  Page 36  Wednesday, April 25, 2018  2:23 PM

Содержание NIKEN MXT850











































































































Отзывы: