Instrument an
d
control functions
3-5
3
EAU84530
“SELECT” switch
This switch is used to make setting
changes within the multi-function me-
ter unit. (See page 3-11.)
EAU84260
Drive mo
d
e switch “MODE”
See page 3-18 for an explanation of
the drive mode.
EAU4939J
In
d
icator li
g
hts an
d
warnin
g
li
g
hts
EAU11032
Turn si
g
nal in
d
icator li
g
hts “
”
an
d
“
”
Each indicator light will flash when its
corresponding turn signal lights are
flashing.
EAU11061
Neutral in
d
icator li
g
ht “
”
This indicator light comes on when the
transmission is in the neutral position.
EAU11081
Hi
g
h
b
eam in
d
icator li
g
ht “
”
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU11259
Oil level warnin
g
li
g
ht “
”
This warning light comes on when the
engine oil level is low. To prevent en-
gine damage, replenish the engine oil
as soon as possible.
Even if the oil level is sufficient, the
warning light may flicker when riding
on a slope or during sudden accelera-
tion or deceleration, but this is not a
malfunction. If a problem is detected in
the oil level detection circuit, the oil lev-
1. Coolant temperature warning light “
”
2. Neutral indicator light “
”
3. Left turn signal indicator light “
”
4. High beam indicator light “
”
5. Oil level warning light “
”
6. Engine trouble warning light “
”
7. Traction control system indicator light “
”
8. Cruise control indicator lights “
” “SET”
9. Right turn signal indicator light “
”
10.Shift indicator light “
”
11.ABS warning light “
”
12.Immobilizer system indicator light “
”
1 2 3
6
5
4
11
8
9 10
7 8
12
ABS
UB5BE1E0.book Page 5 Wednesday, October 30, 2019 9:59 AM