Perio
d
ic maintenance an
d
a
d
justment
7-19
7
characteristics of the motorcy-
cle may
b
e
d
ifferent, which
coul
d
lea
d
to an acci
d
ent.
Always make sure that the valve
caps are securely installe
d
to
prevent air pressure leaka
g
e.
Use only the tire valves an
d
valve cores liste
d
b
elow to
avoi
d
tire
d
eflation
d
urin
g
a ri
d
e.
After extensive tests, only the tires list-
ed below have been approved for this
model by Yamaha.
WARNING
EWA10601
This motorcycle is fitte
d
with super-
hi
g
h-spee
d
tires. Note the followin
g
points in or
d
er to make the most ef-
ficient use of these tires.
Use only the specifie
d
replace-
ment tires. Other tires may run
the
d
an
g
er of
b
urstin
g
at super
hi
g
h spee
d
s.
Bran
d
-new tires can have a rel-
atively poor
g
rip on certain roa
d
surfaces until they have
b
een
“
b
roken in”. Therefore, it is a
d
-
visa
b
le
b
efore
d
oin
g
any hi
g
h-
spee
d
ri
d
in
g
to ri
d
e conserva-
tively for approximately 100 km
(60 mi) after installin
g
a new tire.
The tires must
b
e warme
d
up
b
efore a hi
g
h-spee
d
run.
Always a
d
just the tire air pres-
sure accor
d
in
g
to the operatin
g
con
d
itions.
EAU61160
Cast wheels
To maximize the performance, durabil-
ity, and safe operation of your vehicle,
note the following points regarding the
specified wheels.
The wheel rims should be
checked for cracks, bends, warp-
age or other damage before each
ride. If any damage is found, have
a Yamaha dealer replace the
wheel. Do not attempt even the
smallest repair to the wheel. A de-
formed or cracked wheel must be
replaced.
The front wheels should be bal-
anced whenever either the tires or
wheels have been changed or re-
placed. An unbalanced wheel can
result in poor performance, ad-
verse handling characteristics,
and a shortened tire life.
Front tire:
Size:
120/70 R 15 M/C 56V
Manufacturer/model:
BRIDGESTONE/A41F M
Rear tire:
Size:
190/55 R 17 M/C 75V
Manufacturer/model:
BRIDGESTONE/A41R M
FRONT an
d
REAR:
Tire air valve:
TR412
Valve core:
#9100 (original)
UBD510E0.book Page 19 Tuesday, July 17, 2018 1:55 PM