Yamaha N-100, Руководство по обслуживанию

Страница: 10 / 69

N-100
10
12. Pedal Box Assembly and Pedal Assembly
(Time required: About 6 minutes)
12-1 Fully open the keyboard cover until it is placed
upside down and away from you. (Fig. 4)
12-2 Lay a soft cloth such as a blanket, and put the
finished product on it carefully with the keyboard
side facing upward. (Fig. 14)
* For safety purpose, the work should be done
by two people.
12-3 Remove the four (4) screws marked [9b], slide the
pedal box assembly a little, and remove the screw
marked [P6]. The pedal box assembly can then be
removed. (Fig. 14, Photo 2)
12-4 Remove the seven (7) screws marked [P5]. The
pedal holder can then be removed. (Fig. 15)
12-5 Remove the eight (8) screws marked [P3]. The pedal
assembly can then be removed. (Fig. 16)
• Pedal Box Assembly <Bottom view>
[P5] [P5] Pedal holder
• Pedal Box Assembly <Bottom view>
[P3]
[P3]
Pedal assembly
[P5]: Bind Head Tapping Screw-B 3.0X8 MFZN2W3 (WE774300)
(Fig. 15)
[P3]: Bind Head Tapping Screw-B 4.0X10 MFZN2W3 (WE974500)
(Fig. 16)
[P6]: Bind Head Tapping Screw-B 4.0X8 MFZN2B3 (WE962000)
(Photo 2)
[P6] Speaker box assembly
Pedal box assembly
[9b]
Cloth
Speaker box assembly
Pedal box
assembly
[9b]: Pan Head Screw 6.0X20 MFZN2B3 SP (WF73800)
∗
(Fig. 14)
11. Speakers (Woofers)
(Time required: About 2 minutes)
11-1 Pull out the speaker grille to remove it toward you.
(Fig. 12)
11-2 Remove the four (4) each screws marked [S10].
The right and left speakers (woofers) can then be
removed. (Fig. 13)
Speaker grille
(Fig. 12)
[S10]
[S10]
Speaker
(Woofer) R
Speaker (Woofer) L
[S10]: Bind Head Tapping Screw-1 4.0X14 MFZN2B3 (WF745800)
(Fig. 13)
∗
: not available as spare parts (Refer to parts list.)