24
MY8-LAKE Owner’s Manual
Appendix
Problems and Warnings
Problems, warnings, and other certain types of information are displayed via the MY8-LAKE
panel indicators.
* If any specific problem should persist, please contact your Yamaha dealer.
LED
Indicators
Details
Solution
FAULT
Flash
No input source is available.
Refer to “No Sound” in the
“Troubleshooting” section.
The digital clock is slipping.
Ensure the digital clock is locked
to a valid source. For details,
refer to “Unusual Sound (noise,
interruption, or distortion)” in the
“Troubleshooting” section, and to
the Lake Controller Operation
Manual.
The module output is clipping.
Check the level meters on the
module input and output as well
as on the console, and reduce
the input or output level.
Lit (static)
An internal error of the card.
Restart the host device. If the
problem continues, connect via a
NETWORK connector and
update the firmware using the
Lake Update Utility, and then
restart the device.