Yamaha MXT9L 2019, Руководство пользователя

Страница: 48 / 116

Instrument an d control functions
4-30
4
TIP
When turning the damping force ad-
juster in direction (b), it may turn be-
yond the stated specifications,
however such adjustments are ineffec-
tive and may damage the suspension.
WARNING
EWA10222
This shock a b sor b er assem b ly con-
tains hi g hly pressurize d nitro g en
g as. Rea d an d un d erstan d the fol-
lowin g information b efore han d lin g
the shock a b sor b er assem b ly.

Do not tamper with or attempt
to open the cylin
d er assem b ly.

Do not su b ject the shock a b -
sor b er assem b ly to an open
flame or other hi g h heat source.
This may cause the unit to ex-
plo
d e d ue to excessive g as
pressure.

Do not d eform or d ama g e the
cylin d er in any way. Cylin d er
d ama g e will result in poor
d ampin g performance.

Do not d ispose of a d ama g e d or
worn-out shock a b sor b er as-
sem b ly yourself. Take the shock
a b sor b er assem b ly to a Yamaha
d ealer for any service.
EAU49454
Auxiliary DC jack
A 12-V accessory connected to the
auxiliary DC jack can be used when the
main switch is on.
NOTICE
ECA15432
The accessory connecte d to the
auxiliary DC jack shoul d not b e use d
with the en g ine turne d off, an d the
loa d must never excee d 12 W (1.0 A),
otherwise the fuse may b low or the
b attery may d ischar g e.
To use the auxiliary DC jack
1. Turn the main switch off.
2. Remove the auxiliary DC jack cap.
3. Turn the accessory off.
Re b oun d d ampin g settin g :
Minimum (soft):
2.8 turn(s) in direction (b)
Standard:
1.25 turn(s) in direction (b)
Maximum (hard):
0 turn(s) in direction (b)
1. Auxiliary DC jack cap
1
UBD511E0.book Page 30 Friday, September 13, 2019 11:39 AM