Yamaha MXT9L 2019, Руководство пользователя

Страница: 35 / 116

Instrument an d control functions
4-17
4
EAU84321
Shift pe d al
The shift pedal is located on the left
side of the engine. To shift the trans-
mission to a higher gear, move the shift
pedal up. To shift the transmission to a
lower gear, move the shift pedal down.
(See page 6-3.)
TIP
When the quick shift system is turned
on, the shift switch senses shift pedal
movement and allows for upshifting
without operating the clutch lever.
EAU84560
Quick shift system
The quick shift system (QS) allows for
full-throttle, clutch lever-less, electron-
ically-assisted upshifts. When the shift
switch detects motion in the shift ped-
al, engine power and drive torque are
momentarily adjusted to allow the up-
shift to occur.
TIP

QS operates when traveling at
least 20 km/h (12 mi/h) with an en-
gine speed of 4000 r/min or high-
er, and only when accelerating.

QS does not operate when the
clutch lever is pulled.
To turn the system off
1. Turn the main switch off.
2. Move the shift pedal upward so
that the shift rod is partially re-
tracted into the shift switch, and
hold it in that position.
3. Turn the main switch on, and after
10 seconds release the shift ped-
al.
4. “ ” will disappear.
TIP
To turn on the quick shift system, per-
form the same procedure.
1. Shift pedal
2. Shift switch
2
1
1. Shift switch
2. Rod
1
2
UBD511E0.book Page 17 Friday, September 13, 2019 11:39 AM