Yamaha MX49 Скачать руководство пользователя страница 14

MX49/MX61 Owner’s Manual

Setting Up

14

Auto Power Off function

To prevent unnecessary power consumption, this 
instrument features an Auto Power Off function that 
automatically turns the power off if the instrument is not 
operated for a specified period of time. In the default 
settings, the power will be turned off if this instrument is 
not operated for 30 minutes.

If you wish to disable the Auto Power Off function, turn the 
power on while holding down the lowest key on the 
keyboard. An “Auto power off disabled” message 
appears briefly and Auto Power Off is disabled. The 
setting is retained even if the power is turned off.

The amount of time that elapses before the power is 
automatically turned off can be set by the following 
operation.
[UTILITY] 

 Select “01:General” with Cursor [

u

] button 

 [ENTER] 

 Select “AutoOff” with Cursor [

d

] button, 

then change the value with [DATA] dial 

 [STORE]

NOTICE

• Depending on the instrument status (for example, the 

settings have been modified but not yet stored), the power 
may not turn off automatically, even after the elapse of the 
specified period of time. Always turn off the power 
manually when the instrument is not in use.

• When the instrument is not operated for a specified period 

of time while connected to an external device such as an 
amplifier, speaker or computer, make sure to follow the 
instructions in the Owner’s Manual to turn off the power to 
the instrument and the connected devices, in order to 
protect the devices from damage. If you do not want the 
power to turn off automatically when a device is 
connected, disable Auto Power Off.

• When Auto Power Off is set to “off,” the value will be 

retained even if the backup data saved on another device 
is loaded to the instrument. When Auto Power Off is set to 
something other than “off,” the value will be overwritten 
with loaded data.

• Keep in mind that the amount of time that elapses before 

the power automatically turns off is reset to 30 minutes if 
you execute the Factory Set function (page 15). 

NOTE •

The setting time is approximate.

To turn the power on after Auto Power Off has been exe-
cuted, press the Standby/On switch once to set it to 
Standby, and then press it again to set to On.

Adjusting the volume and 
the brightness of the 
display

Adjust the volume levels of this instrument and the 
connected amplifier/speaker system.

NOTE

When connecting to a set of powered speakers or PA 
equipment, set the Master Volume to about 70%, then raise 
the volume of the powered speakers or PA equipment to the 
appropriate level.

CAUTION

Do not listen with the headphones at high volume for long 
periods of time. Doing so may cause hearing loss.

If the display is not easily visible, while holding down 
[UTILITY], press [INC/YES]/[DEC/NO] to adjust for 
optimum visibility.

Playing the Demo Songs

The MX49/MX61 features a variety of Demo Songs, 
showcasing its dynamic sound and sophisticated 
functions.
Here’s how to play them back.

1

Press [FILE] and [UTILITY] at the same time.

The DEMO display is called up.

2

Rotate the [DATA] dial to select a Demo Song.

3

Press [

F

K

] (Play/Pause) to play back the 

Demo Song.

The Demo Song currently shown on the display starts.

NOTE

To adjust the volume level of the Demo Songs, use the 
[MASTER VOLUME] Knob.

4

Press [

J

] (Stop) to stop the Demo Song.

5

In order to leave the DEMO display, press 
[EXIT].

MX49/MX61

Adjust the volume 

with the [MASTER 

VOLUME] knob.

Adjust the display contrast.

Содержание MX49

















































Отзывы: