Yamaha MWS150-C, Руководство пользователя

Страница: 85 / 98

Vehicle care an d stora g e
8-1
8
EAU37834
Matte color caution
NOTICE
ECA15193
Some mo d els are equippe d with
matte colore d finishe d parts. Be
sure to consult a Yamaha d ealer for
a d vice on what pro d ucts to use b e-
fore cleanin g the vehicle. Usin g a
b rush, harsh chemical pro d ucts or
cleanin g compoun d s when cleanin g
these parts will scratch or d ama g e
their surface. Wax also shoul d not
b e applie d to any matte colore d fin-
ishe d parts.
EAU61030
Care
While the open design of this vehicle
reveals the attractiveness of the tech-
nology, it also makes it more vulnera-
ble. Rust and corrosion can develop
even if high-quality components are
used. A rusty exhaust pipe may go un-
noticed on a car, however, it detracts
from the overall appearance of this ve-
hicle. Frequent and proper care does
not only comply with the terms of the
warranty, but it will also keep your ve-
hicle looking good, extend its life and
optimize its performance.
Before cleanin g
1. Cover the muffler outlet with a
plastic bag after the engine has
cooled down.
2. Make sure that all caps and cov-
ers as well as all electrical cou-
plers and connectors, including
the spark plug cap, are tightly in-
stalled.
3. Remove extremely stubborn dirt,
like oil burnt onto the crankcase,
with a degreasing agent and a
brush, but never apply such prod-
ucts onto seals, gaskets and
wheel axles. Always rinse the dirt
and degreaser off with water.
Cleanin g
NOTICE
ECA20970

Avoi d usin g stron g aci d ic wheel
cleaners, especially on spoke
wheels. If such pro
d ucts are
use d on har d -to-remove d irt, d o
not leave the cleaner on the af-
fecte
d area any lon g er than in-
structe d . Also, thorou g hly rinse
the area off with water, imme d i-
ately d ry it, an d then apply a cor-
rosion protection spray.

Improper cleanin g can d ama g e
plastic parts (such as cowlin g s,
panels, win d shiel d s, hea d li g ht
lenses, meter lenses, etc.) an d
the mufflers. Use only a soft,
clean cloth or spon
g e with wa-
ter to clean plastic. However, if
the plastic parts cannot
b e thor-
ou g hly cleane d with water, d i-
lute d mil d d eter g ent with water
may b e use d . Be sure to rinse
UBE2EYE0.book Page 1 Monday, July 17, 2017 2:03 PM