Yamaha MWS150-C, Руководство пользователя

Страница: 41 / 98

Instrument an d control functions
4-22
4
EAU39657
Auxiliary DC jack
WARNING
EWA14361
To prevent electrical shock or short-
circuitin
g , make sure that the cap is
installe d when the auxiliary DC jack
is not b ein g use d .
NOTICE
ECA15432
The accessory connecte d to the
auxiliary DC jack shoul d not b e use d
with the en g ine turne d off, an d the
loa d must never excee d 12 W (1 A),
otherwise the fuse may b low or the
b attery may d ischar g e.
This vehicle is equipped with an auxil-
iary DC jack in the accessory box.
A 12-V accessory connected to the
auxiliary DC jack can be used when the
key is in the “ON” position and should
only be used when the engine is run-
ning.
To use the auxiliary DC jack
1. Open the accessory box lid. (See
page 4-18.)
2. Turn the key to “OFF”.
3. Remove the auxiliary DC jack cap.
4. Turn the accessory off.
5. Insert the accessory plug into the
auxiliary DC jack.
6. Turn the key to “ON”, and then
start the engine. (See page 6-1.)
7. Turn the accessory on.
EAU70641
Auxiliary DC connector
This vehicle is equipped with an auxil-
iary DC connector. Consult your
Yamaha dealer before installing any
accessories.
1. Auxiliary DC jack cap
1. Auxiliary DC jack
1
1
UBE2EYE0.book Page 22 Monday, July 17, 2017 2:03 PM