CONNECTIONS
16
En
Linking this unit with the Pairing Master device
By registering this unit as a Pairing Device of the
MusicCastnetwork’s Pairing Master (such as a sound bar or
wireless streaming speaker), you can use it as a network
subwoofer to enjoy richer sound.
1.
Register this unit and the MusicCast Surround/Stereo (Pairing Master) compatible unit in
the same location of the MusicCast CONTROLLER app.
(
→
p.15 “Registering this unit on
5.
Following the guidance in the app screen, register this unit as a subwoofer (Pairing Device).
When you have finished registering this unit as a Pairing Device, operate the appropriate room (Pairing Master) in the
app screen to play back audio.
■
Linked operation with the Pairing Master
When you register this unit as a network subwoofer, this unit will follow operations of the room (Pairing Master).
Power operation
This unit’s power setting (Standby/ON) will follow operations of the room (Pairing Master).
Volume and other settings
In accordance with the settings of the room (Pairing Master), this unit's settings will also change in order to obtain optimal
low-frequency sound.
Settings that are linked:
• Volume
• High-cut filter (crossover frequency)
NOTE
●
If audio is interrupted, check the app to see whether “Link control” located in the room (Pairing Master) settings is
selected as shown below.
– For a wireless connection: other than “Speed Boost”
– For a wired connection: “Speed Boost”
■
To cancel the link with the Pairing Master
On your mobile device, operate “MusicCast CONTROLLER” to cancel the registration.
Pairing Master
(sound bar, etc.)
Pairing Device
(NS-NSW100)
2.
On your mobile device,
start “MusicCast
CONTROLLER” and tap
(settings).
3.
Tap “MusicCast
Surround/Stereo.”
4.
Select the room (Pairing
Master) with which you
want to link this unit.
