Backing up and restoring all the settings
Informs the unit's setting to a USB flash drive and restores it to the unit. Prepare a USB flash drive using
FAT16 or FAT32 format in advance.
Setup menu
“Function” > “Backup/Restore”
Choices
Backup
Backups all the settings for the USB flash drive.
Restore
Restores all the previous backuped settings.
1
Connect the USB flash drive to the USB jack on the front panel.
2
Select “Backup” or “Restore”.
In process, “Executing” is displayed on the front display.
When the process finishes, “Complete” is displayed on the front display. In case of “Restore”,
the unit will restart automatically a few seconds later.
If “Error” appears on the front display, check the following and start the process again.
In case of “Backup”:
(
You cannot save by overwriting. If you save the settings repeatedly, please move the file in different folder.
(
The file is stored by the name of “MC_backup_(model name).dat” in the route of the USB flash drive.
In case of “Restore”:
(
Check that the file is stored in the route of the USB flash drive.
NOTE
(
“Restore” is effective after backing up all the settings.
(
Do not turn off the unit during the backing up and restoring process. Otherwise, the settings may not be restored correctly.
(
The user information (such as account, password) is not saved.
(
You can also backup/restore all the settings in “Backup/Restore” in the “Front Display” menu.
Related links
“Basic operation of the Setup menu” (p.151)
211
CONFIGURATIONS > Configuring various functions (Setup menu)