Yamaha MU90R Скачать руководство пользователя страница 89

Страница: 89 / 165

PERFORMANCE MODE

Performance Play Mode

To set the Performance mode and call up Performance Play:

Press the MODE button.

Use the SELECT

button to select “PFM” (PERFORMANCE).

Press the EXIT button or the PLAY button to return to the Play

display.

Indicates Performance mode.

XG
TG300B
C/M
PERFORMANCE

Performance Mode

In the Performance mode, the MU90R performs as a four-Part tone generator,

with all Parts controlled over a single MIDI channel. The Performance mode is

so named because it’s ideally suited to live performance situations. It allows

you to play four different Voices at the same time from your MIDI keyboard —

either in a layer, or in sophisticated keyboard and velocity splits. It also gives

you comprehensive control over each of the four Parts for maximum perform-

ance flexibility. A total of 200 Performances are available: 100 Preset and 100

Internal.

N O T E

Drum Parts are not available in the Performance mode.

Содержание MU90R






































































































































































Результаты поиска

Содержание MU90R

Отзывы:

Yamaha MU90R, Руководство пользователя, Страница: 89 / 165

Результаты поиска

Содержание MU90R

Отзывы: