Yamaha MU90R, Руководство пользователя, Страница: 84 / 165

MULTI MODE
7 5
Drum Setup Parameters
The Drum Setup parameters are only available when the Part Mode has
been set to DrumS1 — S4. (See page 62.)
Pitch Coarse
Range: –64 — +63
This determines the coarse pitch setting of the selected drum sound.
Pitch Fine
Range: –64 — +63
This determines the fine pitch setting of the selected drum sound.
Velocity Pitch Sensitivity (VelPchSens)
This determines the degree to which pitch changes of the selected
drum sound respond to velocity. In other words, you can control
how much the pitch of the sound changes by how hard or soft you
play the keys of a connected keyboard. Positive values raise the
pitch and negative values lower the pitch. A value of 00 results in
no pitch change, whatever velocity is received.
Range: –16 — +16
Level
Range: 000 — 127
This determines the volume of the selected drum sound.
Pan
Settings: Rnd (Random), L63 — C — R63
This determines the stereo position of the selected drum sound. A
setting of “Rnd” (Random) randomly assigns the drum to a pan po-
sition. This is useful when you want to have different drums sound
from different random parts of the stereo image.
Reverb Send (Rev Send)
Range: 000 — 127
This determines the level of the selected drum sound that is sent to
the Reverb effect. A value of 000 results in a completely “dry” drum
sound, no matter how much Reverb is applied to the Drum Part.
N O T E
Keep in mind that the Reverb effect must be properly enabled and set for this parameter to
work as intended. (See page 101.) Also, the parameters Reverb Send in Single Part control
(page 44) and Reverb Return in All Part control (page 47) must be set to appropriate values.