Yamaha MU90R Скачать руководство пользователя страница 47

Страница: 47 / 165

3 8

MULTI MODE

To set the Multi mode:

Press the MODE button.

Use theg SELECT

buttons to select the desired Multi mode:

XG, TG300B or C/M.

Press the EXIT button or the PLAY button to return to the Play

display.

The currently selected mode setting is shown by the arrow at the bottom
right of the display.

XG
TG300B
C/M
PERFORMANCE

Indicates currently selected mode.

Multi Mode

In the Multi mode, the MU90R performs as a multi-timbral tone generator

capable of playing up to 32 Parts simultaneously, over 32 MIDI channels.

Normally, the MU90R should be set to Multi mode when using it with a

sequencer and General MIDI song data. There are three Multi modes: XG,

TG300B and C/M. Each mode provides compatibility with different music soft-

ware and hardware.

XG:

This stands for Extended General MIDI and provides the full poten-

tial of the MU90R, giving you access to all 586 Voices.

TG300B: This mode provides compatibility with the GM-B mode of the TG300

Tone Generator.

C/M:

This mode provides compatibility with most computer music soft-

ware not supported by the other two Multi modes.

N O T E

When set to the TG300B mode, the MU90R may not be able to play TG300-specific song data with complete

accuracy. However, MIDI data designed for other computer music tone generators is compatible with the

MU90R.

Содержание MU90R






































































































































































Результаты поиска

Содержание MU90R

Отзывы:

Yamaha MU90R, Руководство пользователя, Страница: 47 / 165

Результаты поиска

Содержание MU90R

Отзывы: