Yamaha MU90R Скачать руководство пользователя страница 29

Страница: 29 / 165

2 0

GUIDED TOUR

Play this new Voice from the keyboard. Try selecting other Voices
and play them as well. (For a list of all the available Voices, refer to
the

SOUND LIST & MIDI DATA

booklet.

HINT

You can rapidly move through the values by holding down one of the VALUE

buttons.

You can move even more rapidly by holding down one button and then pressing and hold-

ing down the other. For example, to rapidly advance (increase) the value, hold down the

VALUE

button and simultaneously press and hold down the VALUE

–

button.

Changing the Voice Bank

In the current Sound Module mode (XG), several banks of Voices are
available. Each bank can contain up to 128 different Voices.

Operation

Use the

SELECT

buttons to move the arrow cursor to the

left side of the instrument icon, as shown below.

Solid arrow at Bank number (currently selected).

Bank number.

Use these to move arrow cursor.

Arrow cursor (indicates currently selected control).
The arrow is directly above “BANK” on the panel,
indicating that Bank number is currently selected.

Содержание MU90R






































































































































































Результаты поиска

Содержание MU90R

Отзывы:

Yamaha MU90R, Руководство пользователя, Страница: 29 / 165

Результаты поиска

Содержание MU90R

Отзывы: