Yamaha MU100R страница 57 Скачать руководство пользователя

Страница: 57 / 200

Guided Tour

Single Part Controls — Selecting Different

Voices for the Performance

In this next section, you’ll use the Single Part controls to change the Voice
settings of the Performance.

Operation

Call up the Single Part controls.
Simultaneously press both [PART

] buttons.

PART MIDI BANK/PGM# VOL

EXP PAN

REV CHO VAR KEY

For more information on the Single Part controls, see page 129.

Select the desired Part.
Use the [PART

] buttons.

Keep in mind that you should select only from the active Parts —
the ones with a dark bar in the display. Other Parts can be selected
and changed; however, they will not sound in the Performance.

Select the desired bank and Voice.
Do this in the same way as you did in the Multi mode. (See steps
#2 and #3 on page 28.)

Performance name, bank (Preset or Internal), and
program number.

Note Shift
(key transpose
setting for
selected Part).

Reverb Send.

Variation Send.

Part Pan
(stereo position of selected Part).

Expression
(not available; always set to maximum).

(Not available in Single Part.)

Part Volume.

Selected Part number. (Change this with the [PART

] buttons.)

Chorus Send.

Indicates active Part(s) of the
Performance.

Editing in the Performance Mode

Содержание MU100R









































































































































































































Результаты поиска

Содержание MU100R

Отзывы:

Похожие инструкции для MU100R

Бренды по названию

Популярные бренды

Yamaha MU100R, Руководство пользователя

Результаты поиска

Содержание MU100R

Отзывы:

Похожие инструкции для MU100R

Бренды по названию

Популярные бренды