Yamaha MU100R Скачать руководство пользователя страница 183 | Manualshive

Страница: 183 / 200

Yamaha MU100R Скачать руководство пользователя страница 183

Sound Module Mode (MODE)

Sound Module Mode (MODE)

This lets you select the operating mode of the MU100R. Press the
MODE button, then use the SELECT

<

/

>

buttons to select the de-

sired Sound Module mode: XG (Extended General MIDI), TG300B
(General MIDI), C/M (Computer Music) or PFM (Performance). If
XG, TG300B or C/M are selected, the MU100R automatically sets
itself to the Multi mode. When PFM is selected, the MU100R is in the
Performance mode. (See page 6.)

The bottom right of the display indicates the currently selected Sound

Module mode.

Press the

EXIT

button (or any one of the other mode select buttons: PLAY,

EDIT, UTIL, EFFECT or EQ) to use the MU100R in the current mode.

NOTES
• When the MU100R is not set to the XG mode and an XG System On message

is received, the MU100R changes to the XG mode after a slight pause of 0.5
seconds.

• When the TG300B or C/M mode is selected, the VL Voices and Harmony

effect cannot be used.

• In the C/M mode, the Voices available in Parts 11 - 16 are different from those

available in Parts 1 - 9. (Refer to the “Sound List & MIDI Data” booklet.)

• The TG300B mode also has multiple banks. In the C/M mode, there is only

one bank (“Fix” appears at the Bank Number parameter), and for the drum
Part only one drum kit can be selected.

Arrow indicates selected Sound Module mode.

XG
TG300B
C/M
PERFORM

«
...
181
182
183
184
185
...
»

Содержание MU100R









































































































































































































Отзывы:

Нет отзывов