Yamaha MU100R Скачать руководство пользователя страница 139

Страница: 139 / 200

128

Performance Mode

System MIDI Channel (Sys CH)

Settings:

01 — 16

This determines the MIDI receive chan-
nel for all Parts of the Performance.

Performance Bank

Settings:

Pre (Preset), Int (Internal)

This determines the bank of Performance
programs: Preset or Internal. Preset Perfor-
mances are those that have been created and
loaded at the factory; the Internal bank is
reserved for user-created Performances.

NOTE
When changing Performance banks, there may
be a slight delay before the sound changes.

Performance Number

Range:

001 — 100

This determines the Performance number.

NOTE
When changing Performance numbers, there
may be a slight delay before the sound changes.

Performance Part Control

All Part

For basic information on using the All Part controls in the Performance mode, see page
44.

Performance Volume (Pfm Vol)

Range:

000 — 127

This determines the overall Volume of the
Performance.

Performance Pan (Pfm Pan)

Range:

L63 — C — R63

This determines the overall Pan position
of the Performance.

Reverb Return (RevRtn)

Range:

000 — 127

This determines the amount of Reverb
return for the Performance in the overall
mix.

Performance Part Control

Содержание MU100R









































































































































































































Результаты поиска

Содержание MU100R

Отзывы:

Yamaha MU100R, Руководство пользователя, Страница: 139 / 200

Результаты поиска

Содержание MU100R

Отзывы: