manualshive.com logo in svg

Yamaha MU100R, Руководство пользователя, Страница: 133 / 200

Поделиться
Скачать
Yamaha MU100R Скачать руководство пользователя страница 133

122

Multi Mode

Scream Control Depth (ScrCtrlDpt)

Settings:

-64 — +63

Sets the amount of variation produced by
the controller assigned to scream. The
higher the value the greater the variation.
Positive values cause an increase in
scream effect in response to higher con-
troller values (e.g., increased breath pres-
sure or higher modulation wheel posi-
tion), while negative values cause a de-
crease in scream effect in response to
higher controller values.

Breath Noise

Breath Noise Control Change Num-
ber (Bnz CC No.)

Settings:

off, 01 — 31, off, 33 — 95,
AT, VEL, PB

“Breath Noise” can be used to add the
required amount of breath noise to a
Voice. The “Bnz CC No.” parameter
specifies the controller to be used for
breath noise control. When set to “off”,
no breath noise variation can be produced
via a controller, but a continuous breath
noise value is determined by the
“BnzCtrlDpt” parameter, below (negative
values increase the breath noise level).

Details
• The “BnzCtrlDpt” parameter (below) must

be set to an appropriate value (higher than
“+01” or lower than “-01”) for breath noise
control to have any effect.

Breath Noise Control Depth (BnzCtrlDpt)

Settings:

-64 — +63

Sets the amount of variation produced by
the controller assigned to breath noise.
The higher the value the greater the varia-
tion. Positive values cause an increase in
breath noise in response to higher con-
troller values (e.g., increased breath pres-
sure or higher modulation wheel posi-
tion), while negative values cause a de-
crease in breath noise in response to
higher controller values.

Growl

Growl Control Change Number (Grl
CC No.)

Settings:

off, 01 — 31, off, 33 — 95,
AT, VEL, PB

“Growl” produces a periodic pressure
modulation which produces the “growl”
effect often heard in wind instruments.
The “Grl CC No.” parameter specifies the
controller to be used for growl control.
When set to “off”, no growl variation can
be produced via a controller, but a con-
tinuous growl value is determined by the
“GrlCtrlDpt” parameter, below (negative
values increase the growl level).

Details
• The “GrlCtrlDpt” parameter (below) must

be set to an appropriate value (higher than
“+01” or lower than “-01”) for growl con-
trol to have any effect.

Multi Edit Mode

Содержание MU100R









































































































































































































Отзывы:

Нет отзывов