manualshive.com logo in svg

Yamaha MU100R, Руководство пользователя, Страница: 120 / 200

Поделиться
Скачать
Yamaha MU100R Скачать руководство пользователя страница 120

Multi Mode

109

Multi Edit Mode

Mono/Poly Mode

Settings:

mono, poly

This determines whether the Part’s Voice
is played monophonically (only one note
at a time) or polyphonically (up to 64
notes at a time). This parameter is not
available when the Part Mode is set to
Drum.

Portamento Parameters

Portamento is a function that creates a
smooth pitch glide from one note to an-
other.

Portamento Switch (PortametSw)

Settings:

off, on

This determines whether Portamento is
on or off for the Part. (This parameter is
not available for Drum Parts.)

Portamento Time (PortametTm)

Range:

000 — 127

This determines the time of the
Portamento effect, or how long it takes to
glide the pitch from one note to the next.
Higher values result in a longer pitch glide
time. (This parameter is not available for
Drum Parts.)

Element

Element Reserve (ElemReserv)

Range:

00 — 64

This determines the minimum number of
sound elements that are reserved for the
Part. This setting ensures that when the
maximum simultaneous polyphony of 64
notes (or elements) is exceeded, the se-
lected Part will still play up to the num-
ber of elements set here. For example, if
the Element Reserve of a Part is set to
10, the sounds for that Part (up to 10 si-
multaneous notes) will not be cut off, even
if the maximum polyphony is exceeded.
The total number of Element Reserve
values for all of the Parts cannot exceed
64.
This parameter is useful when playing
back dense song data, and it ensures that
the most important Parts in the song data
will play properly without being cut off.

Height of bars indicates selected Mono/Poly
Mode setting for each Part. (A single bar
indicates “mono” setting, while full height
indicates “poly”.)

Height of bars indicates selected Portamento
Switch setting for each Part. (A single bar
indicates “off” setting, while full heignt
indicates “on.”)

Содержание MU100R









































































































































































































Отзывы:

Нет отзывов