manualshive.com logo in svg

Yamaha MU100, Руководство пользователя

Поделиться
Скачать
Yamaha MU100 Скачать руководство пользователя страница 171

Appendix

175

Glossary

A/D input

  Abbreviation for analog-to-digital. The A/

D inputs of the MU100 allow you to process analog
inputs (such as a microphone, electric guitar, CD
player, or another electronic instrument) with the
digital effects of the MU100 and mix them with the
internal Voices.

Assignable Controller 1

  Certain functions on the

MU100 (such as the Filter, Volume or Variation ef-
fect) can be changed in real time by controllers on a
connected MIDI instrument. Assignable Controller
1 lets you determine which controller (for example:
modulation wheel, breath controller, foot control-
ler, etc.) is used for that purpose.

AWM2

  Abbreviation for Advanced Wave Memory 2,

an enhanced version of Yamaha’s original tone gen-
eration system, featuring digital filters for superior
sound.

bank

  A set of Voices or programs. The MIDI standard

supports up to 128 banks, each of which can con-
tain up to 128 Voices or programs.

edit

  Editing is the process of changing or adjusting

the settings of the MU100.

EG

  Abbreviation for Envelope Generator, a common
control on electronic instruments that affects the
“shape” (or envelope) of the sound in time. The
MU100 provides two types of EGs: one for level
and the other for pitch.

Filter

  A control for affecting the frequency content of a

sound. Filters are used to selectively cut or boost cer-
tain frequency ranges in the sound — subtly enhanc-
ing the sound, or dramatically changing its character.
On the MU100, the Filter can be controlled in real
time with the Assignable Controller 1.

General MIDI (GM)

  An addition to the MIDI stan-

dard which effectively ensures that any General
MIDI-compatible song data can be properly played
back on any General MIDI-compatible tone gen-
erator. The standard specifies that a GM-compat-
ible tone generator must have at least 24-note po-
lyphony, 16-part multi-timbral capacity and 128
standard voices. The MU100 exceeds this with 64-
note polyphony, 32-part multi-timbral capacity and
1267 Voices.

host computer

  The controlling computer in a com-

puter music system. The host computer is connected
to the MU100 (via the TO HOST or MIDI termi-
nals) and runs the software necessary for recording
and playing back song data, which is reproduced
by the internal sound sources and effects of the
MU100.

LFO

  Abbreviation for low frequency oscillator, which

generates a low frequency signal that is used to
modulate certain aspects of the sound, such as pitch
or level. Chorus, Flanger, Tremolo, Vibrato and
other modulation effects use LFOs.

MIDI

  Acronym for Musical Instrument Digital Inter-

face, a worldwide standard that allows MIDI-com-
patible instruments and devices to communicate
with each other. For the instruments to communi-
cate, they normally must be set to the same MIDI
channel.

modulation wheel

  A controller found on most MIDI

keyboards which is normally used to control pitch
and other types of modulation. It can be used to
control various aspects of the MU100 sound by
proper setting of the Assignable Controller 1. (See
page 69.)

multi-timbral

  This refers to the capacity of a tone

generator to produce several different sounds at
once. The MU100 is a 32-Part multi-timbral tone
generator, capable of playing 32 different instru-
ment Voices at once, each over an independent MIDI
channel.

Mute

  The Mute function of the MU100 allows you to

silence one Part to hear how all of the other Parts
sound without it.

parameter

  The word “parameter” refers to any ad-

justable setting of an electronic musical instrument.
For example, the Vibrato function of the MU100
has three parameters: Rate, Depth, and Delay.

Part

  The Voices of the MU100 are assigned to sepa-

rate Parts, and up to 32 of these Parts can sound
simultaneously. Parts are analogous to the various
instrumental parts in music: e.g., piano part, guitar
part, etc.

Glossary

Содержание MU100



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды