Example 5) A system using the PGM1 for paging
MTX Setup Manual
148
Storing a preset
Now we’ll store the settings we’ve made up to this point as a preset.
To store or recall a preset, click the camera icon in the upper part of MTX-MRX Editor.
When you click the camera icon, the “Preset” dialog box will appear. You can create up to 50 presets.
Click the preset number that you want to save; the line will be selected. Then click the [Store] button, specify the preset
name, and click the [OK] button.
Specify recall filter settings as necessary. In this example, the settings prevent the XMV’s output channels from being
recalled.
This completes settings in the offline state. Save the settings once again.
NOTE
If you don’t save the preset, alert number 61 is generated.
