Instrument and control functions
5-34
1
2
3
4
5
6
7
8
9
10
11
12
13
2. Push the rear of the seat down to
lock it in place.
3. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.
NOTICE
ECA27380
The IMU is located under the seat. It
is not user serviceable and very sen-
sitive, so we advise against handling
the IMU directly.
Do not remove, modify, or place
any foreign materials in or
around the IMU.
Do not subject the IMU to strong
shocks.
EAU94871
Adjusting the front fork
NOTICE
ECA22472
Use extra care to avoid scratch-
ing the anodized finish when
making suspension adjust-
ments.
To avoid damaging the suspen-
sion’s internal mechanisms, do
not attempt to turn beyond the
maximum or minimum settings.
This model is equipped with ÖHLINS
electronic racing suspension. The com-
pression and rebound damping forces
are electronically adjusted (see ERS on
page 5-19). The spring preload is man-
ually adjusted.
Spring preload
1. Turn the vehicle off.
2. Slide the rubber cover back at
each coupler.
3. Remove the coupler on each front
fork.
NOTICE:
To prevent dam-
aging the couplers, do not use
sharp tools or excessive
force.
[ECA22770]
1. Projection
2. Seat holder
2
2
2
2
1
BGG-9-10-E0.book 34 ページ ２０２２年１月２６日 水曜日 午前１１時３７分
