Special features
4-6
4
EAU91341
Quick shifter
The quick shifter allows for clutch le-
ver-less, electronically-assisted shift-
ing. When the sensor on the shift rod
detects the appropriate motion in the
shift pedal, engine power output is mo-
mentarily adjusted to allow for the gear
change to occur.
The quick shifter does not operate
when the clutch lever is pulled, there-
fore normal shifting can be done even
when the quick shifter is set to on.
Check the quick shifter indicator for
current status and usability informa-
tion.
Upshiftin
g
con
d
itions
Vehicle speed of at least 20 km/h
(12 mi/h)
Engine speed of at least 2200
r/min
Accelerating (open throttle)
Downshiftin
g
con
d
itions
Vehicle speed of at least 20 km/h
(12 mi/h)
Engine speed of at least 2000
r/min
Engine speed sufficiently away
from red zone
Decelerating and throttle fully-
closed
TIP
QS
and QS
can be individ-
ually set.
Shifting into or out of neutral must
be done using the clutch lever.
EAU91350
BC
The brake control system regulates hy-
draulic brake pressure for the front and
rear wheels when the brakes are ap-
plied and wheel lock is detected. This
system has two settings.
BC1 is standard ABS, which adjusts
brake pressure based on vehicle
speed and wheel speed data. BC1 is
designed to engage and maximize
braking when the vehicle is upright.
BC2 uses additional data from the IMU
to regulate applied brake power when
cornering to suppress lateral wheel
slip.
Quick shifter usa
b
ility
In
d
icator
Upshifting OK
Downshifting OK
Quick shifter cannot be
used
Quick shifter turned off
ABS
BC1/BC2
BC2
BC2
UBAM11E0.book Page 6 Wednesday, September 8, 2021 1:00 PM
Содержание MT09SPN
Страница 120: ...DIC183 PRINTED IN JAPAN 2021 09 0 3 1 CR E...