Yamaha MT09N, Руководство пользователя

Страница: 58 / 116

Operation an d important ri d in g points
7-3
7
EAU68221
TIP
This model is equipped with:

an inertial measurement unit
(IMU). This unit stops the engine in
case of a turnover. Turn the main
switch off and then on before at-
tempting to restart the engine.
Failing to do so will prevent the en-
gine from starting even though the
engine will crank when pushing
the start switch.

an engine auto-stop system. The
engine stops automatically if left
idling for 20 minutes. If the engine
stops, simply push the start
switch to restart the engine.
EAU91542
Shiftin g
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing hills,
etc. The gear positions are shown in
the illustration.
TIP

To shift the transmission into the
neutral position (
), press the
shift pedal down repeatedly until it
reaches the end of its travel, and
then slightly raise it.

This model is equipped with a
quick shifter. (See page 4-3.)
NOTICE
ECA22523

When shiftin g , press the shift
pe d al firmly until you feel the
g ear shift is complete.

Even with the transmission in
the neutral position,
d o not
coast for lon g perio d s of time
with the en g ine off, nor tow the
motorcycle for lon g d istances.
The transmission is properly lu-
b ricate d only when the en g ine is
runnin g . Ina d equate lu b rication
may d ama g e the transmission.

Except when usin g the quick
shifter, always pull the clutch le-
ver when chan
g in g g ears to
avoi d d ama g in g the en g ine,
transmission, an d d rivetrain.
EAU16682
To start out an d accelerate
1. Pull the clutch lever to disengage
the clutch.
2. Shift the transmission into first
gear. The neutral indicator light
should go out.
1. Gear positions
2. Shift pedal
2
1 1 1
1
N
2
3
4
5
6
UB7N11E0.book Page 3 Tuesday, August 31, 2021 5:08 PM