Yamaha MT09N, Руководство пользователя

Страница: 46 / 116

Instrument an d control functions
5-24
5
EAU46833
Han d le b ar position
The handlebar can be adjusted to one
of two positions to suit the rider’s pref-
erence. Have a Yamaha dealer adjust
the position of the handlebar.
EAU76345
A d justin g the front fork
WARNING
EWA14671
Always a d just the sprin g preloa d on
b oth fork le g s equally, otherwise
poor han d lin g an d loss of sta b ility
may result.
Each front fork leg is equipped with a
spring preload adjusting bolt, the right
front fork leg is equipped with a re-
bound damping force adjusting screw
and the left front fork leg with a com-
pression damping force adjusting
screw.
NOTICE
ECA10102
To avoi d d ama g in g the mechanism,
d o not attempt to turn b eyon d the
maximum or minimum settin g s.
Sprin g preloa d
Turn the adjusting bolt in direction (a)
to increase the spring preload.
Turn the adjusting bolt in direction (b)
to decrease the spring preload.
The spring preload setting is deter-
mined by measuring distance A,
shown in the illustration. The shorter
distance A is, the higher the spring pre-
load; the longer distance A is, the lower
the spring preload.
1. Handlebar
1
1. Spring preload adjusting bolt
1. Distance A
(b)
1 1 1
(a) (b) (a)
1
UB7N11E0.book Page 24 Tuesday, August 31, 2021 5:08 PM