Yamaha MT-10 SP 2016, Руководство пользователя

Страница: 63 / 118

6-1
1
2
3
4
5
6
7
8
9
10
11
12
Operation and important riding points
EAU15952
Read the Owner’s Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
EWA10272
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.
EAUM3631
TIP
This model is equipped with:

a lean angle sensor to stop the en-
gine in case of a turnover. In this
case, the engine trouble warning
light will come on, but this is not a
malfunction. Turn the key to “OFF”
and then to “ON” to turn off the
warning light. Failing to do so will
prevent the engine from starting
even though the engine will crank
when pushing the start switch.

an engine auto-stop system. The
engine stops automatically if left
idling for 20 minutes. If the engine
stops, simply push the start switch
to restart the engine.
EAU78762
Starting the engine
In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met:

The transmission is in the neutral
position.

The transmission is in gear with
the clutch lever pulled and the sid-
estand up.
See page 4-38 for more informa-
tion.
1. Turn the key to “ON” and make
sure that the stop/run/start switch
is set to “
”.
The following warning lights and
indicator lights should come on for
a few seconds, then go off.

Oil pressure and coolant tem-
perature warning light

Engine trouble warning light

Shift timing indicator light

Steering damper and suspen-
sion warning light

Traction control system indica-
tor light

Cruise control indicator lights

Immobilizer system indicator
light
BW8-9-E0_1.book 1 ページ ２０１６年１２月１３日 火曜日 午前１０時３９分